Search Results for www.diesel-fuels.com

Product Pricing
Select a Product to Determine Current Pricing

(You may also use these links to enter the Shopping Cart to determine shipping cost and Place Orders)

STS 6000 - 30 GPM -- 220V/1ph/60Hz
STS 6000 - 30 GPM -- 220V/1ph/60Hz
 

STS 6000 - 30 GPM eu -- 220-380V/1ph/50 Hz
STS 6000 - 30 GPM eu -- 220-380V/1ph/50 Hz
 

STS 5000-25GPM
Automated Fuel Filtration Systems

STS-5000

Series STS-5000

Flow Rate:

25 gpm - 1,500 gph

Tank Size

20,000 - 50,000 gallon

Port Size

2&auot; NPT

Power

460V/60 Hz or 400V/50Hz

Dimension:

42" x 79" 14" (HxWxD)

Weight

approx. 500 lbs

LG-X Model

LG-X 3000

Primary Filter

40 mesh

Secondary Filter
Water Block

3 or 10 micron
(2 elements required)

Not for use with fluids that have a flash point below 100 deg. F (38 deg. C) (e.g. Gasoline, Alcohol, etc.)


Available Options


Replacement Filter Options
STS 5000 - 25GPM

Spin-on Filter (Requires two of the same filter elements)


STS 5000-25GPM Literature


Articles on Automated Fuel Cleaning

Diesel & Gas Turbine Worldwide - Automated Fuel Cleaning North American Diesel Progress - Automated Fuel Cleaning

The ALGAE-X ® STS 5000 keeps fuels and oil in a stable and "pristine condition". This unit has been designed and developed to be utilized on Diesel Fuel tank cleaning applications when maintaining the fuel quality is imperative, and the operation of a fuel maintenance system must be automatic and safe operation is critical. It is ideal for emergency generators that provide backup power to critical operations centers, such as hospitals, emergency call centers, and computer data centers. Effective with stored fuel, oil and hydraulic fluids, as well as marine vessels of all sizes. It's sensors, alerts systems, and automatic safety shut down features provide worry-free service.

The STS 5000 is a Four Stage Fuel Conditioning and Filtration System:

Stage 1: The centrifugal water separation system removes free water.

Stage 2: The primary filter removes large particulate and protects the pump.

Stage 3: The ALGAE-X® Fuel Conditioner reverses the process of fuel/oil deterioration, extends its shelf life and improves system reliability.

Stage 4: The secondary filter removes emulsified water and inorganic debris down to 3 Micron.

The STS 5000 is a totally enclosed, stand-alone, wall or pad mounted Fuel Conditioning and Filtration System providing Optimal Fuel Quality for Peak Engine Performance. Since fuel is inherently unstable, solids begin to form and the accumulating tank sludge will eventually clog your filters and damage your injectors. It will cause engines to be un-reliable, smoke, lose power and ultimately break down. The system assures that when power is required due to power outage, the generator system will start and run for as long as is needed. This is not the time for clogged, slimy filters to cause a failure to your backup power.

The STS-5000 conditions and stabilizes the fuel, eliminates microbial contamination, removes water, tank sludge and contaminants from the tanks. The principal mechanical components of the system are an ALGAE-X Fuel Conditioner, a continuous duty motor with coupled gear pump, a primary filter water separator/coalescer with a vacuum gauge and a secondary filter with a pressure gauge. All safety and control devices for remote operation are implemented in an isolated compartment inside the fully enclosed, weatherproof system cabinet.

STS-5000

STS Automated Fuel Polishing System

Click on Graphic to Enlarge

1.) Fuel Inlet

11.) Motor

2.) Inlet Ball Valve

12.) ALGAE-X Magnetic Fuel Conditioner

3.) Primary Filter/Water Separator

13.) Secondary Filter

4.) Vacuum Gauge

14.) Pressure Gauge and Pressure Switch

5.) Drain Valve (push and turn to open)

15.) Check Valve

6.) Lid for Primary Filter Replacement

16.) Outlet Ball Valve

7.) Vacuum Switch

17.) Fuel Outlet

8.) Water Sensor

18.) Pressure Relief Valve

9.) Priming Tee

19.) Leak Detector in Catch Basin

10.) Gear Pump

 
STS Fuel Diagram

The LG-X Fuel Conditioner decreases the size and mass of fuel droplets which leads to better filtration and water separation, clear and bright fuel, optimal combustion and clean tanks. The ALGAE-X® unit is self-cleaning, has no moving parts, no electrical hookup, and requires zero maintenance. The primary filter/water separator unit removes water and particulate from the fuel. It can be easily drained, by opening the valve on the bottom. The filter element can be back-flushed several times before replacing. The secondary filter is an easy to change spin-on filter designed to remove emulsified water and inorganic debris down to 3 Micron.

For safe remote operation the STS 5000 is equipped with a leak proof cabinet that has a sufficient retention area along with a leak detector. Other safety elements are alarms followed by a pump shut-off, if the filter elements have to be serviced or the water separator needs to be drained.

SYSTEM COMPONENTS

Control and Safety Devices

Pump/Motor/Coupling:

Magnetic Fuel Conditioner

Primary Filter/Water Separator

Secondary Filter

Weatherproof enclosure with hinged/latch accessible double front doors

STS 5000 Installation