Search Results for www.diesel-fuels.com

Product Pricing

(You may also use these links to enter the Shopping Cart to place an order or to determine shipping cost)

STS 6010 10 GPM Automatic Tank Cleaning System


Your Price: $16834.00


STS 6000-10GPM
Automated Fuel Filtration Systems

Ensures Safe & Reliable Emergency Generator Operation.

STS 6000 10-GPM Automated Systems

Click on Graphic to Enlarge

STS 6000 10 GPM
Automated Fuel Filtration Systems

Series

STS 6000

Flow Rates

10GPM/600GPH

Tank Size

< 10,000 gal

Port Sizes

1" NPT

Power

115V/60Hz (Standard)
230V/50Hz

Programable Digital
Timer

UL 508A listed SFC-50 Smart Control Panel

Pump

Gear Pump

Motor

1 hp single phase, continuous duty

Weight

+/-400 lbs

Operating Temperature

41 - 104 deg. F
5 - 40 deg. C

Suction capability (primed)

15 ft vertical or 100 ft horizontal life (lines > 1", primed)

Max. Fluid Viscosity

5 cST

Dimensions (HxWxD)

37" x 60" x 12"

LG-X Model

LG-X 3000

Primary Filter

Separ SWK-2000/40 Fuel Filter/Water Separator
30 micron standard

Secondary Filter
(Water Block)

3-micron Water Block Spin-On standard

Not for use with fluids that have a flash point below 100 deg. F (38 deg. C) (e.g. Gasoline, Alcohol, etc.)


Available Options (Choose Options in Shopping Cart

Power Options

110V/60Hz or 230V/50Hz

STS 6000 - 10 GPM E304

Stainless Steel Enclosure Option

STS 6000 - 10 GPM OPT AWD

Automatic Water Drain Option

STS 6000 - 10 GPM-2T

Two Tank Control Option


Replacement Filter Options

STS 6000 - 10 GPM

Primary:
Separ SWK-2000/40 Fuel Filter/Water Separator

  • Separ 04010 10-Micron

  • Separ 04030 30-Micron

  • Separ 04060S 60-Micron Stainless Steel Screen (178 Mesh)

Secondary:
Spin-on Filter (Requires two of the same filter elements)

  • FF-3 3-Micron

  • WB-3 3-Micron Water Block Filter

  • FF-10 10-Micron

  • WB-10 10-Micron Water Block Filter

  • FF-25 25-Micron


STS 6000-10GPM Literature


Articles on Automated Fuel Cleaning

Diesel & Gas Turbine Worldwide - Automated Fuel Cleaning North American Diesel Progress - Automated Fuel Cleaning

The STS-6000 10GPM removes water, sludge and prevents tank sediments in stored fuel.

  • Four stage water removal and particulate filtration down to 3 micron

  • Patented Fuel Conditioner reverses fuel deterioration & polymerization to submicron levels

  • Algae-X “Smart Filtration Controller” – UL508A listed - Fully automated programmable control

  • Automatic shut-down for high vacuum, filter pressure, leak and flow interruption detection

  • Integrated industrial display and control panel

  • Easy installation independent of genset (“kidney loop”)

  • Stand alone, safe, reliable, turn key Solution

Fuel is inherently unstable. It naturally forms sediments, solids and tank sludge. Clogged filters, smoke and damage to injection systems are often symptoms of less than optimal fuel quality causing engines to be unreliable, smoke, lose power and ultimately fail. Water naturally accumulates in storage tanks due to condensation or leaks in fills and vents. Water and temperature changes create an environment for microbial growth and natural oxidation, accelerating formation of sludge, acids and tank corrosion.

The STS 6000 Series Fuel Filtration Systems are self contained, stand-alone and fully automated. They recondition and stabilize fuel, eliminate & prevent microbial contamination and remove water, sludge and contaminants from tanks; preserving the integrity of stored fuel, providing reliable power whenever it is needed.

Implementing STS Fuel Maintenance Systems assures Optimal Fuel Quality & Reliable Engine Performance at all times. It prevents costly downtime, periodic tank cleaning, replacing out of spec fuel and injection system repairs.

STS 6000 10-GPM Automated Systems

Click on Graphic to Enlarge

The principal components are a continuous duty motor with coupled gear pump, Separ primary filter / water separator with vacuum sensor & gauge, Algae-X Fuel Conditioner, and a secondary filter with pressure gauge & sensor. The system is automatically operated by the programmable, UL 508A listed Algae-X Smart Filtration Controller. All components and control devices are contained within a fully enclosed, lockable, weatherproof NEMA cabinet.

The primary filter protects the pump and removes water and particulate. The secondary filter is a quick change spin-on filter designed to remove emulsified water and contaminants down to 3 Micron.

For safe operation the STS 6000 4GPM is equipped with a drip tray monitored by a leak detector. Additional safety elements include automatic system shut-down and indicators when filter elements require service, high pump vacuum exists or a flow interruption is detected.

Inside the STS6000-10GPM

Click to Enlarge

1) Fuel Inlet (From Tank)

11) Motor

2) Inlet Ball Valve Separator

12) ALGAE-X® Magnetic Fuel Conditioner

3) Separ Primary Filter/Water Separator

13) Secondary Filter (two in parallel)

4) Vacuum Gauge

14) Pressure Switch (behind post)

5) Drain Valve (push and turn open)

15) Pressure Gauge

6) Man. Air Vent/Bleed Screw

16) Outlet Ball Valve

7) Vacuum Switch

17) Fuel Outlet (To Tank)

8) ALGAE-X® Smart Filtration Controller

18) Mechanical Flow Meter with Flow Switch

9) Pressure Relief Valve

19) Leak Detector (Float Switch) in Spill Tray

10) Gear Pump Controller

 

STS-6000 10 GPM Installation at Ft. Myers, Florida Hospital

STS6000-10GPM Installation at Ft. Myers, Florida Hospital

Click to Enlarge

STS6000-10GPM Installation at Ft. Myers, Florida Hospital

Click to Enlarge

STS6000-10GPM Installation at Ft. Myers, Florida Hospital

Click to Enlarge