Automated Fuel Filtration System
STS 6000-4GPM
Ensures Safe & Reliable Emergency Generator Operation.
The STS-6000 removes water, sludge and prevents tank sediments in stored fuel.
- Three stage water removal and particulate filtration down to 3 micron
- Patented Fuel Conditioner reverses fuel deterioration & polymerization to submicron levels
- Algae-X "Smart Filtration Controller" Fully automated programmable control
- Automatic shut-down for high vacuum, filter pressure, leak and flow interruption detection
- Integrated industrial display and control panel
- Easy installation independent of genset ("kidney loop")
- Stand along, safe, reliable, turn key Solution
Fuel is inherently unstable. It naturally forms sediments, solids and tank sludge. Clogged filters, smoke and damage to injection systems are often symptoms of less than optimal fuel quality causing engines to be unreliable, smoke, lose power and ultimately fail. Water naturally accumulates in storage tanks due to condensation or leaks in fills and vents. Water and temperature changes create an environment for microbial growth and natural oxidation, accelerating formation of sludge, acids and tank corrosion.
| Series |
STS-6000 |
| Flow rates |
4 GPM |
| Tank Size |
200-6,000 gal |
| Port Size |
3/4" |
| Power |
110V/60Hz
230V/50Hz |
| Weight |
200+/- lbs |
| Dim. (HxWxD) |
36" x 36" x 12" |
| LG-X Model |
1500 |
Strainer/
Primary Filter |
80 mesh (178 micron)
10 or 15 micron |
Second. Filter
(Water Block) |
3 or 10 micron |
|
|
| Not for use with fluids that have a flash point below 100 deg. F (e.g. Gasoline, Alcohol, etc.) |
|
The STS 6000 Fuel Filtration Systems are self contained, stand-alone and fully automated. They recondition and stabilize fuel, eliminate & prevent microbial contamination and remove water, sludge and contaminants from tanks; preserving the integrity of stored fuel, providing reliable power whenever it is needed.
 |
 |
 |
 |
ONLINE ORDERING
Review pricing and calculate shipping
to your location
|
 |
 |
 |
 |
Implementing STS Fuel Maintenance Systems assures Optimal Fuel Quality & Reliable Engine Performance at all times. It prevents costly downtime, periodic tank cleaning, replacing out of spec fuel and injection system repairs.
The principal components are a continuous duty motor with coupled gear pump, strainer/primary filter with vacuum sensor & gauge, Algae-X Fuel Conditioner, and a secondary filter with pressure gauge & sensor. The system is automatically operated by the programmable Algae-X Smart Filtration Controller. All components and control devices are contained within a fully enclosed, lockable, weatherproof NEMA 3R cabinet.
The strainer/primary filter protects the pump and removes water and particulate. The secondary filter is a quick change spin-on filter designed to remove emulsified water and contaminants down to 3 Micron.
For safe operation the STS 6000 is equipped with a drip tray monitored by a leak detector. Additional safety elements include automatic system shutdown and indicators when filter elements require service, high pump vacuum exists or a flow interruption is detected.
STS 6000 Accessories: AFC-705 Fuel Catalyst, Wide range of filter elements, Rotor Sight Glass, Foot Valve, Separ Primary Filter, Two tank control, Digital flow meter.
 |
| Click on Graphic to Enlarge |
|
| 1) Fuel Inlet (From Tank) |
11) Motor |
| 2) Inlet Ball Valve |
12) ALGAE-X® Magnetic Fuel Conditioner |
| 3) Separ Primary Filter/Water Separator |
13) Secondary Filter |
| 4) Vacuum Gauge |
14) Pressure Switch |
| 5) Drain Valve (push and turn open) |
15) Pressure Gauge |
| 6) Man. Air Vent/Bleed Screw |
16) Outlet Ball Valve |
| 7) Vacuum Switch |
17) Fuel Outlet (To Tank) |
| 8) ALGAE-X® Smart Filtration Controller |
18) Mechanical Flow Meter with Flow Switch |
| 9) Pressure Relief Valve |
19) Leak Detector (Float Switch) in Spill Tray |
| 10) Gear Pump |
|
|
|
