Search Results for www.diesel-fuels.com

Digital Flow Meters

Digital Flow Meters measures how much fuel has been treated with the ALGAE-X Mobile Tank Cleaning System or Fuel Polishing System. Designed for outdoor use from 14 to 130 deg. F (-10 to +54 deg. C) on fuel transfer applications for diesel, gasoline, kerosene and jet fuel. Protect the Digital Flow Meter by installing a strainer or filter inline upstream of flow when using the primary filters only, and on the discharge side so secondary filters remove large particulates before fuel enters meter.

DM-100 Digital Flow Meter

DM-03 Digital Flow Meter

DM-30 Digital Flow Meter

DM-10 Digital Flow Meter

DM-100 Digital Flow Meter

DM-30 Digital Flow Meter

DM-100 Digital Flow Meter

DM-50 Digital Flow Meter

DM-100 Digital Flow Meter

DM-100 Digital Flow Meter

DM-300 Digital Flow Meter

DM-300 Digital Flow Meter

Due to manufacturer's periodic un-announced changes to the above Flow Meter designs and appearance, the flow meter shipped my vary in appearance from the above, but the performance will be consistent with the below published specifications.


 

DM-03
Digital Flow Meter

DM-10
Digital Flow Meter

DM-30
Digital Flow Meter

DM-50
Digital Flow Meter

DM-100
Digital Flow Meter

DM-300
Digital Flow Meter

Flow Range

0.3-3 GPM

1-10 GPM

3-30 GPM

3-50 GPM

10-100 GPM

30-300 GPM

Thread

1" NPT (Low Flow)

0.5" NPT

1" NPT

1" NPT

1.5" NPT

2" NPT

Pressure Rating

300 psig

1500 psig

300 psig

300 psig

1500 psig

300 psig

Temperature

140 deg F with Display - 250 deg F without Display

140 deg F with Display - 250 deg F without Display

+14 deg to 130 deg F

140 deg F with Display - 250 deg F without Display

140 deg F with Display - 250 deg F without Display

140 deg F with Display - 250 deg F without Display

Design Type

Paddlewheel

Turbine

Turbine

Turbine

Turbine

Turbine

Typical
Accuracy

+/- 1.0% (field
calibrated)

+/- 2% Linear Range 10:1
+/- 5% Linear Range 20:1

+/- 5% (factory
calibrated)

+/- 1.0% (field
calibrated)

+/- 1% Linear Range 10:1
+/- 5% Linear Range 20:1

+/- 1.0% (field
calibrated)

Maximum
Pressure Drop

2 PSIG @
Full Flow

8 PSIG @
Full Flow

1.7 PSIG @
Full Flow

5 PSIG @
Full Flow

4 PSIG @
Full Flow

7 PSIG @
Full Flow

Power

2 Lithium
Batteries
(included)

Battery

2 x AAA
batteries
(not included)

2 Lithium
Batteries
(included)

Battery

2 Lithium
Batteries
(included)

Electronic Features

Flow rate,
resettable batch count
non-resettable
cumulative count

Flow rate,
resettable batch count
non-resettable
cumulative count

Flow rate,
resettable batch count
non-resettable
cumulative count

Flow rate,
resettable batch count
non-resettable
cumulative count

Flow rate,
resettable batch count
non-resettable
cumulative count

Flow rate,
resettable batch count
non-resettable
cumulative count

Weight

1 lbs

2.2 lbs

1 lbs

1 lbs

4.6 lbs

2.5 lbs

Dimensions (LxHxW) - Inches

4 x 2.5 x 2

4.2 x 1.8 x 2.0

4 x 2 x 2.5

4 x 2.5 x 2

5.3 x 2.8 x 2.7

6 x 4.25 x 3

Features

Battery Operated
Up to 3 Totals
Batch & Cumulative Totals
Field Calibratable
6 Digits - Floating Decimal
Auto & Manual ON/OFF

Battery Operated
Up to 3 Totals
Batch & Cumulative Totals
6 Digits - Floating Decimal
Auto & Manual ON/OFF

Battery Operated
Batch & Cumulative Total
Field Calibrateable
4 Digit Display
Auto ON/OFF

Battery Operated
Up to 3 Totals
Batch & Cumulative Totals
Field Calibratable
6 Digits - Floating Decimal
Auto & Manual ON/OFF

Battery Operated
Up to 3 Totals
Batch & Cumulative Totals
6 Digits - Floating Decimal
Auto & Manual ON/OFF

Battery Operated
Up to 3 Totals
Batch & Cumulative Totals
Field Calibratable
6 Digits - Floating Decimal
Auto & Manual ON/OFF

Approvals

FM Approved Class I Div I

FM Approved Class I Div I

FM Approved Class I Div I

FM Approved Class I Div I

FM Approved Class I Div I

Materials (Wetted)

Body: Aluminum
Rotor/Support: Nylon
Bearings: Ceramic
Shaft: Tungsten Carbide
Signal Generator: Ferrite
Retaining Rings: 316SS

Body: 316 Stainless Steel
Rotor/Support: PVDF
Bearings: Ceramic
Shaft: Tungsten Carbide
Signal Generator: Ferrite
Retaining Rings: 316SS

Body: Aluminum
Rotor: Nylon
Bearings: Ceramic
Shaft: Tungsten Carbide
Signal Generator: Ferrite
Retaining Ring: 304SS
Shaft Support: Nylon

Body: Aluminum
Rotor/Support: Nylon
Bearings: Ceramic
Shaft: Tungsten Carbide
Signal Generator: Ferrite
Retaining Rings: 316SS

Body: 316 Stainless Steel
Rotor/Support: PVDF
Bearings: Ceramic
Shaft: Tungsten Carbide
Signal Generator: Ferrite
Retaining Rings: 316SS

Body: Aluminum
Rotor/Support: Nylon
Bearings: Ceramic
Shaft: Tungsten Carbide
Signal Generator: Ferrite
Retaining Rings: 316SS